This module is designed for use with Merchant v4.x only...

Included are the files for the OpenUI (No Price)  module.

** PLEASE READ ALL INSTRUCTIONS PRIOR TO INSTALLING/USING THIS MODULE **

** YOU WILL NEED YOUR LICENSE KEY.  THIS IS NORMALLY PROVIDED WHEN YOU **
** PURCHASE THE MODULE AND IS LISTED ON YOUR EMAILED RECEIPT.  IF YOU  **
** CANNOT FIND YOUR LICENSE KEY (OR YOU DIDN'T PAY VIA CREDIT CARD),   **
** PLEASE CONTACT SB21Online CUSTOMER SERVICE VIA OUR WEBSITE.        **

** INSTALLATION AND USE OF THIS MODULE INDICATES ACCEPTANCE **
**      OF THE ENCLOSED LICENSE AGREEMENT (license.txt)     **

** Instructions for Updating an already installed module is at the end of this file **

Before installing this module, you will need to install the OpenUI module.
This is a UI module that functions identically to the MerchantUI module
(mmui.mv) except it adds in hooks for 3rd party developers to add features
without requiring code modifications.

This installation is accomplished by following the directions below and using
the enclosed OpenUI Installer/Updater.  The OpenUI Installer/Updater can also
be used at any time to update your OpenUI code to the latest released version.

A reminder that most of your store settings will have to be entered again
due to the way that Merchant associates store settings with the specific
UI module.  To avoid this, follow the instructions below to Export and
Import your store settings.

Also, the OpenUI includes Open Customer Email and Merchant Email modules.
These modules email the same information as the non-Open versions but
will allow extension modules to safely add information to these emails in
the same way the OpenUI works.  These modules will be automatically
installed and the non-Open versions will be disabled.  All settings will
be automatically copied over.  If you have customized Merchant Email and/or
Customer Email modules, you simply need to go into your Order Fulfillment
section and go to the Open Customer Email and/or the Order Merchant Email
and uncheck the Enable checkboxes and click the Update button.  This will
re-enable the non-Open versions with their original settings.

Installing the OpenUI Installer/Updater(tm) Utility module(s):
1.  Run the admin.mv
2.  Open the "Modules" branch
3.  Click on the "Add Module" link
4.  Click the "Upload" graphic button
5.  Enter the filename of the modules on your local drive
6.  Press the "Upload" button
7.  Press the "Add" button

Adding OpenUI Installer/Updater(tm) Utility to your store:
1.  Run the admin.mv
2.  Open the "Stores" branch
3.  Open the branch for the specific store
4.  Click on the "Utilities" link
5.  Check the "OpenUI Installer/Updater(tm)" module
6.  Press the "Update" button
7.  Select the "OpenUI Installer/Updater(tm)" tab
8.  Enter your license key (*** ANY valid SB21 license key will work! ***)
9.  Press the "Update" button

Installing/Updating the OpenUI and UI Import/Export modules:
1.  Run the admin.mv
2.  Open the "Stores" branch
3.  Open the branch for the specific store
4.  Open the "Utilities" link
5.  Click on "OpenUI Installer/Updater(tm)"
6.  Press the "Process Update" button

Exporting your store settings:
1.  Run the admin.mv
2.  Open the "Stores" branch
3.  Click on the arrow next to the store name
4.  Click on the arrow next to the "Utilities" branch
5.  Click on the arrow next to the "Export" branch
6.  Click on the "MMUI/OpenUI Settings Export" module
7.  To have it emailed to you, click on the "Email" tab and fill it out
8.  Click the Export button

Setting up your store to use the OpenUI module:
1.  Run the admin.mv
2.  Open the "Stores" branch
3.  Click on the store name
4.  Click on the "Layout" link tab
5.  Select the "Open Look & Feel" radio button
6.  Press the "Update" button

Importing your store settings:
1.  Run the admin.mv
2.  Open the "Stores" branch
3.  Click on the arrow next to the store name
4.  Click on the arrow next to the "Utilities" branch
5.  Click on the arrow next to the "Import" branch
6.  Click on the "MMUI/OpenUI Settings Import" module
7.  Click on the Upload button and fill out the filename
8.  Click the Upload button
9.  Click the Import button

Installing the OpenUI (No Price) module:
1.  Run the admin.mv
2.  Open the "Modules" branch
3.  Click on the "Add Module" link
4.  Click the "Upload" graphic button
5.  Enter the filename of the modules on your local drive
6.  Press the "Upload" button
7.  Press the "Add" button

Adding OpenUI (No Price) to your store:
1.  Run the admin.mv
2.  Open the "Stores" branch
3.  Open the branch for the specific store
4.  Click on the "System Extension Configuration" link
5.  Check the "OpenUI (No Price)" module
6.  Press the "Update" button
7.  Select the "OpenUI (No Price)" tab
8.  Enter your license key
9.  Press the "Update" button

Updating a Module:
1.  Run the admin.mv
2.  Open the "Modules" branch
3.  Click on the name of the module to be updated
4.  Click on the word "Files" which is next to "Information" in the right-hand frame
5.  Click the "Upload" graphic button
6.  Enter the filename of the module on your local drive or use "Browse" to find it
7.  Check the "Overwrite" box so that the updated module will overwrite the old
8.  Press the "Upload" button
9.  Press the "Update" button